Request a Quote
Turbidity Tube · Model 10125

Construct Enviro Turbidity Tube

30–500 NTU. Designed for construction site managers, engineers and environmental officers — a straightforward tool for fast, routine turbidity readings to help monitor silt levels in construction surface water.

Construct Enviro turbidity tube, model 10125
Silt MonitoringSurface-Water MonitoringTurbidity TestingConstruction MonitoringUK-Wide DeliveryQuote-Based Ordering
Turbidity tube readings from murky to clear water
Key Benefits

Built for site conditions

  • 01Quick readings — assess sediment levels quickly against a clear scale
  • 02Durable, impact-resistant build for construction environments
  • 03Simple to use — fill, observe the cross, record the result
  • 04Supports environmental monitoring on site
  • 05Lightweight and portable between testing points
Specification

Product information

Turbidity tube dimensions: 33cm length, 3.2cm diameter
ManufacturerConstruct Enviro
Part Number1
Item Weight107g
Product Dimensions33.5 × 3 × 33.5cm; 107g
Item Model Number10125
Included ComponentsTurbidity Tube
PackagingCardboard tube
How To Use A Turbidity Tube

Four steps, on site

A turbidity tube is a simple field tool used to check how cloudy or turbid the water is (NTU), which can help identify silt sediment volume from a development site (TSS) — part of surface water monitoring commitment on construction sites. Watch the short video below, or follow the steps.

  1. 01

    Take the tube to your monitoring location

    Bring the turbidity tube to your designated surface-water monitoring point.

  2. 02

    Fill until the cross is no longer visible

    Slowly fill the tube with your water sample until the cross marker at the base disappears from view.

  3. 03

    Record the number on the side of the tube

    The scale reading at that fill level is your turbidity result — record it in the site’s monitoring log.

  4. 04

    Clean the tube before reusing

    Empty the sample and rinse the tube with clean water so it’s ready for the next reading.

FAQs

Common questions

A clear tube used to visually assess the turbidity, or cloudiness, of a water sample. The sample is viewed against a marker, and the result read from the tube's scale.

Email constructenviro@gmail.com with the product required, quantity and delivery address — or use the Request a Quote form.

Yes. Provide the relevant office or construction-site delivery address when requesting your quotation.

A turbidity tube is a field-monitoring method and can be used in conjunction with laboratory analysis or other specified monitoring methods. Always follow the monitoring methodology and requirements applicable to your individual project.

Check the tube regularly against a clean light source. Scratches, cloudiness or yellowing on the plastic scatter light and can make readings look worse than the water actually is. If it won’t polish clean, it’s time to retire it — request a quote for a replacement.

Ordering & Delivery

Getting products to site

Pricing is confirmed as part of your quotation — email us the details below and we’ll come back with the numbers. See the FAQs for more on bulk orders and delivery.

Email UsThe product and quantity you need, plus your delivery address — office or construction site.
Bulk OrdersOrders up to 30 units are available as standard.
DeliveryWe aim to deliver to site or office locations within 3–5 working days.